What is the difference between PC-Base and Stand-Alone DVR?
line
 
What is the difference between Operation System (OS) DVR and Non-Operation System (Non-OS) DVR?
line
 
What is Image Compression and how many Compression Formats are used in DVR?
line
 
Firmware Update Steps (HDR-08MS/ 16MS IE built-in)
line
 
Where to check DVR F/W and Network Card versions on Simplex?
line
 
Where to check DVR F/W and Network Card versions on Duplex?
line
 
Where to check DVR F/W and Network Card versions on Triplex?
line
 
Hardware Reset (for Network DVR)
line

For remote monitoring on IE browserˇJto recover Default User Name and Password (admin/ admin).

w/ Network CardˇJ
Hardware ResetˇJ(4 Steps)
1. Make sure the power of the DVR is off.
2. Open the case of the DVR.
3. Check the network card in the upper-right corner of the case.

4. Press the orange button of the network card till the power of the DVR is on and IP Installer can detect DVR. This will take you around 30 seconds.

w/ IE built-inˇJ
OSDˇJMenu ˇ÷ Setup Mode ˇ÷ Load Default.
line
 
Update Firmware via USB Flash Memory, but it shows "Firmware file not found".
line
 
How to check USB flash memory compatibility.
line

product tag
product tag line
IP security button
IP security line
DVR button
DVR line

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
9F, No.171, Sec. 2, Datong Rd., Sijhih City, Taipei 22183, Taiwan, R.O.C. Tel: 886-2-8692-7999 Fax: 886-2-8692-6678
® 2007 Hunt Electronic Co.,LTD. All Rights Reserved